Tag Archives: china compressor

China factory Fql289 Cheap Price Woodon Flexible China Pipe Gear Compressor Shaft Coupling

Product Description

Product     Name Cardan Shaft
Product     Model SWC-I75A-335+40
Main          Material 35CrMo or 45# Steel
Nominal  Torque 500  N.M
Normal      Length 335 mm
Length       Compensation 40 mm

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible gear coupling

Safety Considerations When Using Flexible Gear Couplings in Critical Applications

Flexible gear couplings are widely used in critical applications where safety and reliability are of utmost importance. While these couplings are designed to accommodate misalignments and reduce vibrations, there are some safety considerations to keep in mind:

  • Proper Installation: Ensure that the flexible gear coupling is installed correctly according to the manufacturer’s guidelines. Improper installation can lead to premature failure and safety hazards.
  • Regular Inspection: Perform regular inspections and maintenance to identify any signs of wear, damage, or misalignment. Addressing issues promptly can prevent unexpected failures.
  • Torque and Speed Ratings: Adhere to the specified torque and speed ratings of the coupling. Operating the coupling beyond its limits can lead to catastrophic failure.
  • Environmental Conditions: Consider the environmental conditions in which the coupling will operate. Factors such as temperature, humidity, and the presence of corrosive substances can impact the coupling’s performance and safety.
  • Emergency Stop Mechanism: In critical applications, it is essential to have an emergency stop mechanism in place to quickly disengage the coupling during emergencies.
  • Overload Protection: Implement overload protection systems to prevent excessive torque transmission, which could cause damage to connected equipment.
  • Periodic Maintenance: Follow a regular maintenance schedule to ensure that the coupling remains in optimal condition and to identify any potential safety risks.
  • Training and Awareness: Ensure that personnel operating and maintaining the equipment are adequately trained and aware of the safety considerations related to the flexible gear coupling.

By adhering to these safety considerations and following best practices, the use of flexible gear couplings in critical applications can contribute to safe and reliable operation, reducing the risk of downtime and costly failures.

flexible gear coupling

Real-World Case Studies of Flexible Gear Couplings in Engineering Projects

Flexible gear couplings have been successfully implemented in various engineering projects across different industries. Here are some real-world case studies showcasing their benefits:

  1. Steel Rolling Mill: In a steel rolling mill, flexible gear couplings were used to connect the main drive motor to the rolling mill’s gearbox. The couplings accommodated the misalignment between the motor and gearbox shafts, reducing vibration and noise during operation. The flexibility of the gear teeth helped protect the gearbox from shock loads caused by changes in the rolling load, extending the gearbox’s lifespan and ensuring smooth and reliable power transmission.
  2. Paper Manufacturing Plant: A paper manufacturing plant utilized flexible gear couplings in their pulp processing equipment. The couplings’ ability to compensate for both angular and parallel misalignments allowed for easier installation and alignment of the equipment. The coupling’s torsional flexibility ensured constant velocity transmission, critical for maintaining consistent paper quality during the production process. Additionally, the damping effect of the gear teeth reduced vibrations, minimizing wear and tear on the machinery and improving overall equipment reliability.
  3. Wastewater Treatment Plant: At a wastewater treatment plant, flexible gear couplings were employed in the aeration system. The couplings helped absorb shock loads from the aeration process, protecting the blowers and motors from potential damage. Their flexibility allowed the coupling to handle misalignments caused by settling of the foundation over time. This resulted in reduced maintenance downtime and increased overall efficiency of the treatment plant.
  4. Wind Turbine Application: Wind turbines utilized flexible gear couplings to connect the low-speed shaft to the high-speed shaft. The coupling’s flexibility allowed for efficient transmission of torque despite the dynamic wind load fluctuations. This flexibility also provided overload protection during extreme wind conditions, safeguarding the turbine’s mechanical components from damage. The coupling’s ability to dampen vibrations contributed to the turbine’s smooth operation, reducing wear and tear and maintenance costs.

These case studies demonstrate the versatility and effectiveness of flexible gear couplings in various engineering applications, showcasing their ability to enhance performance, reduce maintenance, and improve the reliability of critical systems.

flexible gear coupling

Proper Installation of Flexible Gear Couplings for Optimal Performance and Reliability

Proper installation of a flexible gear coupling is crucial to ensure its optimal performance, reliability, and longevity. Here are the steps to follow for a successful installation:

  1. Inspect the Coupling: Before installation, carefully inspect the coupling components, including the hubs, gear teeth, and flexible element, for any damage or defects.
  2. Clean the Components: Ensure that all components are clean and free from dirt, debris, and any contaminants that could affect the coupling’s performance.
  3. Check Alignment: Verify that the shafts of the connected equipment are properly aligned within the manufacturer’s recommended tolerances. Misalignment can lead to premature wear and failure of the coupling.
  4. Grease or Lubricate: Apply the appropriate coupling lubricant or grease to the gear teeth and the flexible element. Lubrication helps reduce friction, heat generation, and wear.
  5. Assemble the Coupling: Carefully assemble the coupling by aligning the gear teeth of the hubs and the internal sleeve. Follow the manufacturer’s guidelines for the correct orientation and positioning.
  6. Tighten Fasteners: Gradually tighten the fasteners, such as bolts or screws, in a cross-pattern to ensure even pressure distribution. Do not overtighten, as it can cause deformation of the coupling components.
  7. Perform a Trial Run: After installation, perform a trial run to check for any abnormalities, unusual noises, or vibrations. Monitor the coupling during the trial run to detect any potential issues.
  8. Regular Maintenance: Implement a regular maintenance schedule to inspect and lubricate the coupling periodically. Follow the manufacturer’s maintenance guidelines to ensure the coupling’s continued performance and reliability.
  9. Replace Worn Components: If any components of the coupling show signs of wear or damage during maintenance inspections, replace them promptly to prevent further issues.

It is essential to follow the manufacturer’s installation instructions and guidelines specific to the flexible gear coupling model to achieve the best results. Proper installation enhances the coupling’s ability to handle misalignment, transmit torque efficiently, and ensure reliable operation in the power transmission system.

China factory Fql289 Cheap Price Woodon Flexible China Pipe Gear Compressor Shaft Coupling  China factory Fql289 Cheap Price Woodon Flexible China Pipe Gear Compressor Shaft Coupling
editor by CX 2024-02-22

China Custom 50HP Screw Air Compressor Parts Rubber Material Flexible Coupling

Product Description

Product Description:
product  name : Screw air compressor parts Rubber Material Flexible Coupling  
delivery:1-3working days after payment recived.
warranty : 1 year

Our Services:
  
1.24 hours a day, 7 days a week

2.1-stop purchasing

3.Cheap, fast and efficient

4.adequate stocks
5.17 years experiences

6. Seriously quality control

7.Superb technique

No matter what you want, just send me your part number , favorable price will be quoted immediately.

our goal is to “provide the best products and services to our customers”
1.High Quality With Favorable Price
We ensure that the parts we offer are met your needs with high quality ,

Our Product include:

Screw air comrepssor, Screw air compressor Airend, Used Screw air compressor,

OEM Screw air compressor, air dryer

 

OEM Screw air compressor, air dryer

Oil free spare parts, Shaft Seal/ Sleeve  ,Sensor      

Screw air compressor Solenoid Valve/ Thermostat Valve/ Air intake Valve / Minimum Pressure Valve

screw air compressor Blow Off Valve/ Drain Valve / Wheel Gear / Oil Level Indicator/ Master Controller 

screw air compressor Service Kits / Air Filter / Oil Filter / Oil separator / Filter element /Lubrictaed oil 
 

Temperature Sensor P.N

1 0571 7107,1 0571 7144,1 0571 7164,1 0571 7101,1 0571 7102,1 0571 7103,1 0571 7105,1 0571 7106,1 0571 7108,1 0571 7141,1 0571 7140,1 0571 7116,1 0571 7155  1 0571 7151,1089958  39538079 39271609,38433546,85652535,42853243,37952439,1   1  1119 0571   A98612-120  98612-122   A11507074  09Q060G1936  1  

Controller Panel P.N

19 16223931 8829 25

16138366 16136673 16149584 16139509

 

Air Filter P.N  

 /16215743 =1616714683

 1616728180=1616560480

1616585182

 1616585181 

1616728190
                                                

Gear wheel
Material :Stainless Steel
For screw air compressors, high-quality gears guarantee the use of the compressor
Packing & Delivery

Product name geal wheel
Application screw air compressor
Packag wooden
Delivery time 1-3 working days
Payment method T/T, Paypal, Western union,
shipping method TNT, EMS,UPS,Fedex, and so on

Our Company

    Hongkong CHINAMFG Industry Limited was established in 2000, located in Chang’an town, HangZhou  city– “China National Machinery and Hardware town” We’re a Hi-Tech company specialize in research, development, manufacture and distribution of air compressor sparts. With our rich experience, profession technology and rigorous quality control, our products are widely used in air compressor field with good feedback and continuous orders from more than 2,000 customers in domestic and oversea market.We can solve any technical problems you may encounter with your air compressor and provide many kinds of air compressor parts for  you.
Our Service
24 hours a days, 7 days a week

² 1-stop purchasing

² Competitive price, good quality and efficient

² We accept your specific order and do everything we can to meet your requirement.

 you, if you send us inquiry!

We are the best choice for you!

FAQ

 

 

Q1: Are you factory or trade company?  

 

A1:We are factory.

 

Q2: What the exactly address of your factory? 

 

A2: Our head office is located in 2F Xingshun Technology Park, Chongtou community,Chang’an, HangZhou City ZheJiang Province,china.

And our factory is located in Area B,Industry Zone,Lian hua County, HangZhou City, ZheJiang Porvince, China. (That is our boss’s hometown)

 

Q3: Warranty terms of your machine? 

 

A3: One year warranty for the machine and technical support according to your needs.

 

Q4: Will you provide some spare parts of the machines? 

 

A4: Yes, of course. we can provide all spare parts for the machines

 

Q5: How long will you take to arrange production? 

 

A5:380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 14-18days

 

Q6: Can you accept OEM orders? 

 

A6: Yes, with professional design team, OEM orders are highly welcome.

 

Contact

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible coupling

Can flexible couplings be used in heavy-duty applications such as mining and construction?

Yes, flexible couplings can be used in heavy-duty applications such as mining and construction, where the equipment operates under challenging conditions and encounters high loads, vibrations, and misalignments. Flexible couplings offer several advantages that make them suitable for these demanding environments:

  • Misalignment Compensation: Heavy-duty equipment in mining and construction may experience misalignment due to the rough terrain, uneven surfaces, or heavy loads. Flexible couplings can handle both angular and parallel misalignment, ensuring smooth power transmission even in these adverse conditions.
  • Shock and Vibration Absorption: Mining and construction operations often involve high-impact loads and vibrations. Flexible couplings can dampen and absorb these shocks, protecting the connected components from damage and reducing wear and tear on the equipment.
  • Torsional Stiffness: While flexible couplings are designed to accommodate misalignment, they still maintain a certain level of torsional stiffness to transmit torque efficiently. This is crucial in heavy-duty applications, where high torque is required to drive the machinery.
  • Corrosion and Contamination Resistance: In mining and construction environments, equipment may be exposed to dust, dirt, water, and chemicals. Flexible couplings made from corrosion-resistant materials can withstand these harsh conditions, ensuring reliable performance and longevity.
  • High Torque Transmission: Heavy-duty machinery often requires high torque transmission between the driving and driven components. Flexible couplings are capable of transmitting high torque efficiently, which is essential for the operation of large-scale equipment.
  • Reduced Downtime: The robustness and reliability of flexible couplings in heavy-duty applications contribute to reduced downtime. By minimizing the impact of misalignment, shocks, and vibrations, flexible couplings help prevent unexpected breakdowns and maintenance issues.

When selecting a flexible coupling for heavy-duty applications, it’s important to consider the specific requirements of the machinery and the operating conditions. Factors such as the type of equipment, torque and speed requirements, environmental conditions, and expected loads should be taken into account.

Overall, flexible couplings are a versatile solution for power transmission in heavy-duty applications, providing the necessary flexibility, durability, and performance to withstand the challenges posed by the mining and construction industries.

flexible coupling

How does a flexible coupling accommodate changes in shaft alignment due to thermal expansion?

Flexible couplings are designed to accommodate changes in shaft alignment that occur due to thermal expansion in rotating machinery. When equipment operates at elevated temperatures, the materials used in the shafts and other components expand, causing shifts in the relative positions of the connected shafts. This thermal expansion can lead to misalignment, which, if not addressed, may result in additional stress on the equipment and premature wear.

Flexible couplings employ specific design features that allow them to handle thermal-induced misalignment effectively:

  • Flexibility: The primary feature of a flexible coupling is its ability to flex and deform to some extent. This flexibility allows the coupling to absorb small amounts of angular, parallel, and axial misalignment that may result from thermal expansion. As the shafts expand or contract, the flexible coupling compensates for the misalignment, helping to maintain proper alignment between the two shafts.
  • Radial Clearance: Some flexible couplings, such as elastomeric couplings, have radial clearance between the coupling’s mating parts. This radial clearance provides additional room for the shafts to move laterally during thermal expansion without creating excessive forces on the coupling or connected equipment.
  • Sliding Elements: Certain flexible couplings feature sliding elements that can move relative to each other. This capability allows the coupling to accommodate axial displacement resulting from thermal expansion or other factors.
  • Flexible Element Materials: The materials used in the flexible elements of the coupling are chosen for their ability to handle the temperature range experienced in the application. Elastomeric materials, for example, can be selected to withstand high temperatures while still maintaining their flexibility.

It is essential to understand that while flexible couplings can compensate for some degree of thermal-induced misalignment, there are limits to their capabilities. If the thermal expansion exceeds the coupling’s compensating range, additional measures, such as incorporating expansion joints or using specialized couplings designed for greater misalignment compensation, may be necessary.

When selecting a flexible coupling for an application with potential thermal expansion, it is crucial to consider the expected operating temperature range and the level of misalignment that may occur due to thermal effects. Working with coupling manufacturers and consulting coupling catalogs can help in choosing the most suitable coupling type and size for the specific thermal conditions of the machinery.

flexible coupling

How does a flexible coupling impact the overall reliability of connected equipment?

A flexible coupling significantly impacts the overall reliability of connected equipment in several ways:

  • Misalignment Compensation: Flexible couplings can accommodate both angular and parallel misalignment between connected shafts. By allowing for misalignment, the coupling reduces the stress and wear on bearings, seals, and other rotating components. This feature prevents premature failure of these components, contributing to improved reliability and extended equipment lifespan.
  • Vibration Damping: Flexible couplings possess inherent damping properties due to their elastomeric or flexible elements. These elements absorb and dissipate vibrations generated during the operation of machinery. By dampening vibrations, the coupling protects the connected equipment from excessive oscillations, reducing fatigue and preventing mechanical failures. This enhanced vibration control increases the reliability of the system.
  • Shock Load Absorption: In applications with sudden load variations or shock loads, such as in heavy machinery or high-speed equipment, a flexible coupling acts as a shock absorber. It can absorb and dissipate the impact energy, protecting the machinery from damage caused by sudden loads. The ability to absorb shock loads contributes to the overall reliability of the connected equipment.
  • Reduced Wear and Tear: The flexibility of the coupling minimizes stress and wear on rotating equipment. It allows for slight movements and misalignments, reducing friction and stress on bearings and other critical components. This reduction in wear and tear lowers the frequency of maintenance and replacement, increasing the overall reliability of the equipment.
  • Compensation for Thermal Expansion: Temperature changes in machinery can lead to thermal expansion or contraction of shafts. A flexible coupling can compensate for these thermal effects, ensuring that the machinery remains properly aligned even as temperature conditions fluctuate. This compensation prevents binding and misalignment, promoting reliable performance.
  • Protection Against Overloads: Flexible couplings help protect connected equipment from overloads and torsional vibrations. They act as a mechanical fuse, disconnecting the driveline when an overload occurs, thus preventing damage to expensive machinery. This safety feature enhances the overall reliability and reduces the risk of catastrophic failures.
  • Easy Maintenance and Alignment: Flexible couplings are designed for easy installation and alignment. This feature simplifies maintenance procedures, making it easier to inspect and replace couplings when necessary. Properly aligned couplings lead to improved equipment performance and longevity, enhancing overall reliability.

By compensating for misalignment, damping vibrations, absorbing shock loads, reducing wear and tear, and providing other protective features, a flexible coupling significantly improves the reliability of connected equipment. It extends the lifespan of critical components, minimizes downtime, and ensures smooth and efficient operation, making it a valuable component in various industrial applications.

China Custom 50HP Screw Air Compressor Parts Rubber Material Flexible Coupling  China Custom 50HP Screw Air Compressor Parts Rubber Material Flexible Coupling
editor by CX 2024-02-21

China high quality Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor

Product Description

Product Description

Gear Flex Coupling Element Kit 295711501/16139823/1613982300

Type: Gear Flex Coupling

Applied: Atlas Copco

Certificate: iso 9001.

 

Coupling Selection Method

  • Torque – power [kW] • Speed [r/min]
  • Type of equipment and application
  • Shaft diameters
  • Shaft gaps
  • Physical space limitation
  • Special bore or finish information

Coupling Features

  • Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
  • Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
  • The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
  • Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
  • Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
  • Reliable operation, stable performance, convenient installation, disassembly and maintenance.

 

Detailed Photos

 

Determining the right type of flexible coupling starts with the following analysis of the application:

  • Prime mover type (motor, diesel engine, etc.) of the drive side of the system
  • Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
  • Drive system inertia related to prime mover inertia (data available from equipment supplier)
  • vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
  • Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
  • Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
  • whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.

 

We are able to offer a wide range of special couplings, which are based on your samples or drawings.

Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CHINAMFG type Coupling Spare and other products, widely used in industrial applications.

 

All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
 

More Products for Choose

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900

Tips:
 
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
 

 

Company Profile

       Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

Company team

Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,

We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.

 

 

With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.

We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.

 

Packaging & Shipping

 

 

FAQ

 Q1. What is your product range?

A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your required specifications and drawings.

Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.

Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.

Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible gear coupling

Compensation for Axial, Angular, and Parallel Misalignments with Flexible Gear Couplings

Flexible gear couplings are known for their ability to accommodate various types of misalignments, including axial, angular, and parallel misalignments. Here’s how they compensate for each type:

  • Axial Misalignment: Axial misalignment occurs when the two shafts move closer or farther away from each other along the axis of rotation. Flexible gear couplings can absorb this type of misalignment through their flexible design, allowing the gear teeth to articulate and adjust to the axial movement without transmitting harmful forces to the connected equipment.
  • Angular Misalignment: Angular misalignment occurs when the two shafts are not collinear and form an angle with each other. Flexible gear couplings can accommodate angular misalignment by allowing the gear teeth to articulate and flex as the shafts are angularly displaced. This flexibility ensures that torque transmission remains smooth and minimizes stress on the coupling and connected equipment.
  • Parallel Misalignment: Parallel misalignment happens when the two shafts are offset horizontally while maintaining parallelism. Flexible gear couplings can handle this misalignment by utilizing their flexible elements to adjust to the lateral displacement of the shafts. The ability to compensate for parallel misalignment prevents excessive forces from being transmitted to the machinery, protecting it from damage.

Thanks to their design and material properties, flexible gear couplings provide a reliable solution for compensating for axial, angular, and parallel misalignments, making them suitable for a wide range of applications in various industries.

flexible gear coupling

Design Considerations for Selecting a Flexible Gear Coupling

When selecting a flexible gear coupling for a specific application, several design considerations are crucial to ensure optimal performance and reliability:

  • Torque Capacity: Determine the maximum torque requirement of the application and choose a coupling with sufficient torque capacity to handle the transmitted loads without exceeding its limits.
  • Speed: Consider the operating speed of the machinery and select a coupling that can handle the rotational speed without generating excessive heat or vibrations.
  • Misalignment Tolerance: Assess the expected misalignment between the shafts in the system and choose a coupling that can accommodate both angular and parallel misalignments within acceptable limits.
  • Service Environment: Evaluate the working conditions, including temperature, humidity, and the presence of corrosive agents, and select a coupling made from materials suitable for the specific environment.
  • Space Limitations: Take into account the available space for the coupling installation and choose a compact design that fits within the available constraints.
  • Alignment Maintenance: Consider the ease of alignment and maintenance requirements of the selected coupling. Some couplings may require more frequent maintenance than others.
  • Backlash: Evaluate the application’s tolerance for backlash (angular play) in the coupling and select a design that meets the required precision.
  • Torsional Stiffness: Determine the need for torsional stiffness in the system to avoid torsional vibrations and ensure accurate torque transmission.
  • Resonance Avoidance: Identify potential resonance frequencies in the system and choose a coupling that helps avoid resonance, preventing amplified vibrations.
  • Cost: Consider the budget constraints and compare the cost-effectiveness of different coupling options while ensuring the selected coupling meets all the necessary requirements.

By carefully considering these design factors, engineers and designers can choose the most suitable flexible gear coupling for their specific application, ensuring smooth operation, reduced maintenance, and extended equipment lifespan.

flexible gear coupling

Accommodating Misalignment and Reducing Vibrations in Flexible Gear Couplings

Flexible gear couplings use an elastomeric flexible element, often made of high-quality rubber, to connect the two gear hubs. This design allows the coupling to accommodate misalignment between the connected shafts and reduce vibrations during operation.

1. Misalignment Accommodation: The flexible nature of the elastomeric element allows it to bend and flex as the shafts move out of alignment. Flexible gear couplings can accommodate three main types of misalignment:

  • Angular Misalignment: Occurs when the shafts are not parallel and are at an angle to each other.
  • Parallel Misalignment: Occurs when the shafts are not in a straight line but are parallel to each other.
  • Axial Misalignment: Occurs when the shafts are displaced along their axis.

The ability to handle these types of misalignment is crucial in various industrial applications where machinery may experience movement, thermal expansion, or other dynamic forces.

2. Vibration Reduction: The elastomeric material in the flexible gear coupling acts as a damping mechanism. It absorbs and dissipates vibrations and shocks generated during operation. This damping effect helps in reducing noise levels and protects the connected equipment from damage caused by excessive vibrations.

Overall, the combination of misalignment accommodation and vibration reduction in flexible gear couplings contributes to improved system reliability, reduced maintenance requirements, and extended machinery life.

China high quality Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor  China high quality Gear Flexible Coupling 1613982300 Design for CHINAMFG Air Compressor
editor by CX 2024-02-15

China Good quality High Quality Air Compressor Parts Flexible Coupling 98156/50

Product Description

Product presentation

High Quality Air Compressor Parts Flexible Coupling 98156/50

 

Certifications

 

 

1.Our factory have very inner quality inspection system for each procedure , QC operator inspect semi-finished parts in each the production procedure as QC flow chart and FMEA , make sure the parts is qualified to flow into the next procedure.
2.The first filter of finish products test in lab as OEM standard and national standards , then 1 batch can flow into
warehouse.
3.For any quality problem , we will provide 8D corrective action , in the first time to make sure same quality problem not occur.
4.Quality management passed ISO9+ last 6 months only Alibaba , this is the first in all of the compressor spare parts and filter company in China(offical data from Alibaba )

2. Business level is 3 Diamonds , this is first in all of the compressor spare parts and
filter company in China(offical data from Alibaba )

3. We got the most of praise of good seller in the Alibaba , 13 years specialized compressor filter and 8 years spare parts production and export to more than 120 countries, the number of praise from client is first in all of the compressor spare parts and filter company in China(offical data from Alibaba )

4 . Alibaba provide USD 26000 payment value guarantee for client , it means if our goods have any quality problem , Alibaba will provide MAX USD 26000 compensation to you .

 

More than 14 years , we establish thorough Sales network in China , won the excellent reputation .At the same time we start from the company export business in 2013 and have rapid development ,now exported more than 10 years ,won the appreciation of customers more than 70 Countries .

FAQ

1.Price:
All prices and terms are quoted in US Dollar under FOB HangZhou or CIF your country port , and the price available for 1 months.
2. Minimum Order Quantity:
Each item has a minimum order quantity, which would be stated in our quote sheet. Assorted items would be negotiable.
3.Delivery Lead Time:
If there have stocks, the lead time is about 1 week after we get the payment, if need producing ,7 days after we get the prepay CHINAMFG request.
4. Payment Terms:
T/T , Western Union , PayPal .

 
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible coupling

How does a flexible coupling contribute to the longevity of connected equipment?

A flexible coupling plays a crucial role in enhancing the longevity of connected equipment in various ways. It acts as a mechanical interface between two shafts, connecting them while accommodating misalignment, dampening vibrations, and transmitting torque. Here’s how a flexible coupling contributes to the longevity of connected equipment:

  • Misalignment Compensation: One of the primary functions of a flexible coupling is to compensate for both angular and parallel misalignment between two shafts. Misalignment can occur due to various factors, including thermal expansion, assembly errors, or settling of foundation, which can exert excessive stress on the connected equipment. By allowing misalignment, the flexible coupling reduces the stress transmitted to the shafts and connected components, preventing premature wear and failure.
  • Shock and Vibration Dampening: Flexible couplings are designed to absorb shocks and dampen vibrations that occur during operation. Vibrations and shocks can be detrimental to connected equipment, leading to fatigue, wear, and premature failure of components. The coupling acts as a buffer, reducing the impact of vibrations and protecting the equipment from potential damage.
  • Reduced Stress Concentration: A rigid coupling can create stress concentration points on the shafts, leading to fatigue and cracking over time. Flexible couplings distribute the load more evenly along the shafts, reducing stress concentration and minimizing the risk of failure.
  • Transmitting Torque Smoothly: Flexible couplings transmit torque from one shaft to another smoothly, without introducing sudden torque spikes or shocks. This even torque transfer prevents sudden loading on connected equipment, minimizing the risk of damage or accelerated wear on gears, bearings, and other components.
  • Controlling Torsional Vibrations: In systems where torsional vibrations are a concern, certain types of flexible couplings are designed to address this issue. These couplings help control torsional vibrations, which can be damaging to the equipment and cause premature failure.
  • Thermal Expansion Compensation: When the equipment operates at different temperatures, thermal expansion can lead to misalignment between the shafts. A flexible coupling can accommodate the thermal expansion, ensuring that the connected equipment remains aligned and preventing stress on the components.
  • Isolation from External Forces: External forces like impact loads or shaft disturbances can affect the connected equipment. A flexible coupling isolates the equipment from these external forces, protecting it from potential damage.

By providing these essential functions, a flexible coupling helps extend the lifespan of connected equipment by reducing wear and tear, preventing premature failures, and ensuring smooth, reliable operation. The longevity of the connected equipment ultimately results in reduced maintenance costs and increased productivity.

flexible coupling

How does a flexible coupling handle misalignment in large rotating equipment?

Flexible couplings are designed to accommodate various types of misalignment in large rotating equipment, ensuring smooth and efficient power transmission while minimizing stress on connected components. Here’s how flexible couplings handle different types of misalignment:

  • Angular Misalignment: Angular misalignment occurs when the axes of the two connected shafts are not collinear and form an angle. Flexible couplings can handle angular misalignment by allowing the coupling elements to flex and move slightly, thus accommodating the angle between the shafts. The flexible elements, often made of elastomeric materials or metallic membranes, can bend and twist to compensate for angular misalignment, ensuring that the coupling remains engaged and transfers torque effectively.
  • Parallel Misalignment: Parallel misalignment, also known as offset misalignment, happens when the two shafts are not perfectly aligned along their axes, resulting in a lateral shift. Flexible couplings can handle parallel misalignment through their ability to move radially, allowing the flexible elements to adjust and take up the offset. This capability prevents excessive side loads on the shafts and bearings, reducing wear and increasing the lifespan of the equipment.
  • Axial Misalignment: Axial misalignment occurs when there is a linear displacement of one shaft relative to the other, either toward or away from the other shaft. Some flexible couplings, such as certain types of flexible disc couplings, can accommodate a limited amount of axial misalignment. However, for large axial movement, other types of couplings or special designs may be required.

The flexibility of the coupling elements allows them to act as a buffer between the shafts, dampening shocks, vibrations, and torsional forces caused by misalignment or other dynamic loads. This helps protect the connected equipment from damage and enhances the overall performance and reliability of the rotating system.

In large rotating equipment, where misalignment is more common due to thermal expansion, foundation settling, or other factors, flexible couplings play a critical role in maintaining smooth operation and reducing stress on the machinery. However, it is essential to choose the appropriate type of flexible coupling based on the specific requirements of the application and to regularly inspect and maintain the coupling to ensure optimal performance and longevity.

flexible coupling

Are there any safety considerations when using flexible couplings in rotating machinery?

Yes, there are several safety considerations to keep in mind when using flexible couplings in rotating machinery. While flexible couplings offer numerous benefits in terms of misalignment compensation, vibration isolation, and shock absorption, improper use or maintenance can lead to safety hazards. Here are some important safety considerations:

  • Proper Installation: Ensure that the flexible coupling is installed correctly and securely following the manufacturer’s guidelines. Improper installation can lead to coupling failure, unexpected disconnection, or ejection of coupling components, which may result in equipment damage or injury to personnel.
  • Alignment: Proper shaft alignment is essential for the reliable and safe operation of flexible couplings. Misaligned shafts can cause excessive stress on the coupling and connected components, leading to premature wear and possible failure. Regularly check and maintain proper shaft alignment to prevent safety risks.
  • Operating Conditions: Consider the environmental and operating conditions of the machinery when selecting a flexible coupling. Some couplings are designed for specific temperature ranges, hazardous environments, or corrosive atmospheres. Using a coupling that is not suitable for the operating conditions can compromise safety and performance.
  • Torque and Speed Limits: Always operate the flexible coupling within its specified torque and speed limits. Exceeding these limits can cause coupling failure, leading to unexpected downtime, equipment damage, and potential safety hazards.
  • Maintenance: Regularly inspect and maintain the flexible coupling to ensure its continued safe operation. Check for signs of wear, damage, or corrosion, and promptly replace any worn or damaged components with genuine parts from the manufacturer.
  • Emergency Stop Mechanism: In applications where safety is critical, consider implementing an emergency stop mechanism to quickly halt machinery operation in case of coupling failure or other emergencies.
  • Personal Protective Equipment (PPE): When working with rotating machinery or during maintenance tasks involving couplings, personnel should wear appropriate PPE, such as gloves, eye protection, and clothing that can resist entanglement hazards.
  • Training and Awareness: Ensure that personnel working with the machinery understand the potential hazards associated with flexible couplings and receive proper training on safe handling, installation, and maintenance procedures.

By adhering to these safety considerations, operators and maintenance personnel can mitigate potential risks and ensure the safe and reliable operation of rotating machinery with flexible couplings. Additionally, it is essential to comply with relevant safety standards and regulations specific to the industry and application to ensure a safe working environment.

China Good quality High Quality Air Compressor Parts Flexible Coupling 98156/50  China Good quality High Quality Air Compressor Parts Flexible Coupling 98156/50
editor by CX 2024-02-12